Search Results

Search results 1-19 of 19.

  • User Avatar

    Ok ! Thnak you very much for explanation !

  • User Avatar

    Hello, I have a doubt: I need to connect a USB printer to my board (fsimx6V3.1), do I have to change my device tree? Each time I connect the printer to my board, I cannot see any folder like "/dev/ttyUB0". It is not recognised. For example, connecting USB storage, shows two folders: sda and sda1, which I can mount. The same as with my SD card, that shows two folders: mmcblk2 and mmcblk2p1. I need to send some commands to the USB port. Thank you !!

  • User Avatar

    Thanks again, but as I cited afterwards, that was not the solution. It has to do something with dhcp scripts at booting. Thanks.

  • User Avatar

    Thanks for the explanation !

  • User Avatar

    Hi RSchubert, thank you very much for your response. Even if you are right, it has to be a dot-separated number, I have changed and it does not work.After some tests, I have realised that the problem is DNS resolution. It only works when I change /etc/resolv.conf file with the following content: #resolv.conf content manually written nameserver 80.58.61.250 nameserver 8.8.8.8 nameserver 8.8.4.4 But after rebooting, it disappears. Something is overwriting this file when the system is rebooted.I ne…

  • User Avatar

    Hello again, I have made a built again, and this time it worked. I do not why but the thing is that now I have python, SSH, git, flask, and every thing i need till today. Thanks for your support. FYI: In the built working, rootfs.ext4 is a link too. It does not seem to be relevant.

  • User Avatar

    Hi, I am trying to retrieve some information from the internet using git or wget, but both applications say that they cannot resolve address. My /etc/network/interfaces file has the following content: auto eth0 iface eth0 inet static address 192,168,1,33 netmask 255,255,255,0 gateway 192,168,1,1 dns-nameservers 192,168,1,100 8,8,8,8 I am inside a LAN with a router. Fedora VM accesses internet withput problems, but my board, does not. What configuration do I ha need ? Thanks !

  • User Avatar

    Apart from LVDS and SSH, I need git, python and flask. What I do in order to compile this way is launch "make menuconfig" and change settings. After that, just "make". So far this is what I need, but I think that I will have to include more packages such as Mysql soon.

  • User Avatar

    More details: /etc/init.d/S50sshd script points to /usr/bin/sshd script that does not exist. In that folder (/usr/bin/) i can find among others: -rwxr-xr-x 1 root root 0 May 28 19:10 ssh* -rwxr-xr-x 1 root root 0 May 28 19:10 ssh-add* -rwxr-xr-x 1 root root 0 May 28 19:10 ssh-agent* -rwxr-xr-x 1 root root 0 May 28 19:10 ssh-keygen* -rwxr-xr-x 1 root root 0 May 28 19:10 ssh-keyscan* but not sshd script. Each time I execute /etc/init.d/S50sshd I can see that inside /var/lock a new file named sshd …

  • User Avatar

    This is output folder with every file inside and the link. Thanks

  • User Avatar

    Well, as I could not find a solution, I got started a new virtual machine. The problem disappeared.

  • User Avatar

    Hi, after rebooting U-boot there are no changes. Keys are not generated and sshd_config is empty

  • User Avatar

    I can add one more thing. I have an older compilation where I got four files: *uImage * rootfs.ubifs * rootfs.ext4 * armstonea9.dtb In this compilation, SSH works fine. In my other compilations, instead of those files y get these: *uImage * rootfs.ubifs * rootfs.ext2 * armstonea9.dtb *Link to rootfs.ext4 that points to nothing Could this be relevant ?? I am not using the first built because It does not have LVDS output, and I need it. Thanks !!

  • User Avatar

    Thanks again but in my case, it does not work. Furthermore, I do not have any ssh_host_* file and after rebuilding builroot+kernel and carrying out same steps, unfortunately the same out come. Thanks. One more detail I can add is that in my folder /var/run there is not a sshd.pid file with the process ID, meaning it is not running, is not it?

  • User Avatar

    By the way, which options are needed in buildroot configuration in order to ssh work? I mean when executing "make menuconfig" from buildroot folder. thanks

  • User Avatar

    Hi, thanks a lot for your response. irisangel. After applying your solution nothing happens. The content of my ssh folder is the following: * ssh_config --> empty *sshd_config--> empty *moduli --> empty I have never had any "ssh_host_*" file. Thanks again !

  • User Avatar

    Hi, I have my sshd_config file totally empty. When booting the board I get the message " Starting sshd: OK" but it does not generate keys. I have mounted the file system as "rw" and restart sshd executing "S50sshd restart" in "int.d" folder. Nothing happens. How can I check if sshd server is up and running? Do I have to activate any option when compiling buildroot for ssh to work? Thanks.

  • User Avatar

    Hi, I am using Fedora Virtual Machine from F&S. I just call "install_source" script, and launch "make fsimx6_std_defconfig" and "make" GCC version: [developer@localhost arm]$ gcc --version gcc (GCC) 5.3.1 20160406 (Red Hat 5.3.1-6) Copyright (C) 2015 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

  • User Avatar

    Hello, I am trying to generate buildroot + kernel image supporting python 2.7, flask and LVDS output. After "make clean" for erasing, "make menuconfig" for new configuration on python + flask + other libraies, and "make" commands for building, the process gives me the following mistake: Source Code (35 lines) any tips? Thanks !