Search Results

Search results 1-20 of 1,000. There are more results available, please enhance your search parameters.

  • User Avatar

    Hello, in general (FTDI) VPC on NetDCUA5 should work in the same way as on NetDCU10! But it is difficult to say what is going wrong. Is there any information on the serial debug port? Else i assume we have to debug the usb/serial Microsoft driver layers. Can you provide us your hardware for do that?

  • User Avatar

    Use of Serial3 Interface

    fs-support_ZU - - NetDCU11

    Post

    Ah ok, so your baord was already configured for RS232 instead of ADC (default)!

  • User Avatar

    Use of Serial3 Interface

    fs-support_ZU - - NetDCU11

    Post

    Hello, according HW manual default settings for J7.9/10 are AD3/AD2. So a recontruction is required. Because warranty disappears if you did modifications you have to send board as RMA (we will do confuguration for service lump-sum).

  • User Avatar

    Touch problems on new 11.2 boards

    fs-support_ZU - - NetDCU11

    Post

    Sorry we have no new dirver. Is it possible to send us a complete test enviroment (display+touch+all required cables) that we can direct connect to a NetDCU SKIT and which shows the problem? Because this problem is not widespread i assume this is the best way for get a resolution.

  • User Avatar

    Hi Angold, the link above refers the HOST not the DEVICE. At the time it is not possible to change DEVICENAME because it comes with boot arguments from EBOOT. The only chance to do this is to customize cerhost - i will discuss internally this issue but the code is public ( ...\<WinXY>\PUBLIC\COMMON\OAK\DRIVERS\CERDISP\CERDISP) so you can also do it by yourself.

  • User Avatar

    Hello, if you order PicoCOM1 equipped with ATO Flash you have to install follwing System Software Versions else the boards will not boot anymore: NBoot >= V31 EBoot >= V106 Kernel >=V127

  • User Avatar

    PicoCOM with ATO Flash

    fs-support_ZU - - PicoCOM4

    Post

    Hello, if you order PicoCOM4 equipped with ATO Flash you have to install at least NBoot V27 else the boards will not boot anymore. EBoot and kernel are not effected.

  • User Avatar

    Hello, under WCE7 you can use Microsoft SQL Server Compact Edition or SQLite for access data bases but MS stopped support for Microsoft SQL Server Compact Edition module, so since WEC2013 you have to use SQLite which can be donwloaded from various locations, e.g. archive.codeplex.com/?p=cesqlite2013

  • User Avatar

    Hello, sorry we have to change forum in 2012 so a lot of old links are invalid. Im most cases it may help to search for keywords. E.g. search "mmtimer.lib" ... leads to ... timeGetTime mmTimer.lib hangs application ?!

  • User Avatar

    Hello, before debugging via Ethernet you have to start "cemgrc" with the corresponding command line. As far as i remember you are requested to do this by EVC. I don't know why your connection is not stable, there are no known issues (and main stream Support for EVC++ ended in 2007!). Another possibilty for debugging is to use ActiveSync via USB device connection. This is more easy by using VS2005/08.

  • User Avatar

    Tesa PicoMOD3 does not boot

    fs-support_ZU - - PicoMOD3

    Post

    Hello, Quote: “... if that's the matter, but I don't think it's a problem. You simply can't reverse engineer a thing with that picture.”I agree. But there are also other matters: - most customers won't see here company name in this forum, even there employees use nick names without a link to the company name. - there should be a major reason why TESA NBoot/EBoot is password protected! So it would be a crime if we publish the passwords or any details of system- and application SW. So i please you…

  • User Avatar

    Tesa PicoMOD3 does not boot

    fs-support_ZU - - PicoMOD3

    Post

    Hello, think your doing is irregular. You publish internas of TESA in the www. Please contact TESA for resolve the problem.

  • User Avatar

    Hello, what is the result of the test above? Time still increases one hour after each reboot? Did you trty to set HomeDST explicit to zero: [HKEY_LOCAL_MACHINE\Software\Microsoft\Clock] "HomeDST"=DWORD:0 And/or switch timeserver compltely off: reg open \Services\TIMESVC reg set value Flags dword 4

  • User Avatar

    Hello, did you install "Application Builder for Windows Embedded Compact 2013" first? But as far as i remenber this is required befor install any SDK.

  • User Avatar

    DotNet Version

    fs-support_ZU - - NetDCUA5 - NXP Vybrid

    Post

    Hello, under Windows Embedded Compact only .NET Compact Framework is supported: VS2005: WCE6/WEC7 CF2.0 VS2008: WCE6/WEC7 CF3.5 VS201X: WEC2013 CF3.9 (X>=)2)

  • User Avatar

    You are rigth we did not update our corresponding FTP Folder - so you cannot see the file. I did this now please check again.

  • User Avatar

    Hello, this issue is resolved with Windows Embedded Compact 2013 updates up to 2016M10 (Kernel Version V2.20, refer changelog).

  • User Avatar

    Efeus A9

    fs-support_ZU - - efusA9 NXP i.MX6

    Post

    Guten Tag, ich verstehe die Frage nicht ganz. Welchen Treiber verwenden Sie überhaupt z.Z., es gibt mehrere z.B. einen resistiven und mehrere capazitive. Siehe Registry [HKEY_LOCAL_MACHINE\DRIVERS\BUILTIN\<Board Type>\TOUCH_XXX. Dort können Sie in der Regel auch einstellen welcher I2C verwendet wird (Wert I2CDevice). Sie könnten das ganze dort umstellen und mit angepasster HW testen.

  • User Avatar

    Hello, unfortunately such a feature does not exist and is not on our roadmap. Few suggestion, not genteel but maybe useful: switch back light off:( or set another top level window which covers the "update window" and carry your own information or hide the "update window". You can does this by an own applcation started with very first command in update script. Hope this helps.

  • User Avatar

    Hello, we checked, playing video with current Image is not supported. Some modules are missed. We do create an image so that you can test this feature. Note, imx6sx use no HW acceleration for playing videos! PS: Also i will keep you informed about the license will be needed!