Picocom 4 + XIPNKPC4_CORE_CF35_140521.bin + hitachi TX09

      Picocom 4 + XIPNKPC4_CORE_CF35_140521.bin + hitachi TX09

      i update my picocom4 to kernel XIPNKPC4_CORE_CF35_140521.bin without problem but i use TX09 display, i change mode to 2 but i have black screen.

      With my previous kernel it works.
      below the NDCterm:

      Source Code

      1. <0>
      2. Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Mar 7 2013 14:18:11
      3. Microsoft Windows CE Bootloader for PicoCOM4 Built Mar 7 2013
      4. Portions copyright (c) 2009 F&S Elektronik Systeme GmbH
      5. Boot Loader, Version 1.8
      6. NBoot, Version C425
      7. HW-Watchdog: ON
      8. System ready!
      9. Preparing for download...
      10. Press >S< to step into monitor...
      11. AUTO BOOT enabled
      12. Kernel (2699kB) read from flash disk started finished in 1 milliseconds
      13. INFO: OEMLaunch: Jumping to Physical Address 0x301422CCh (Virtual Address 0x0h)...
      14. Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 14 2011 at 17:32:03
      15. PicoCOM4 V1.16 - Firmware Init
      16. Copyright (c) 2010 F&S Elektronik Systeme GmbH
      17. Build: May 21 2014/10:00:43
      18. INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
      19. HW-WATCHDOG: ENABLED
      20. FMD: NAND ID:0xec76 --> Samsung: 512MBit (64MB)
      21. FMD: IsBlockBad - Page #: 0x0
      22. FMD: IsBlockBad - Page #: 0x20
      23. FMD: Block 0 to 20 are locked for boot loader
      24. -OEMInit
      25. OALIoCtlHalInitRTC: Year: 2006, Month: 1, Day: 1, Hour: 12, Minute: 0, second: 0
      26. Time returned from OEMGetRealTime: Year: 2006, Month: 1, Day: 1, Hour: 13, Minute: 13, second: 25
      27. Drivers\Builtin\Serial1 - OFF
      28. RestartReason: Reset
      29. FMD: NAND ID:0xec76 --> Samsung: 512MBit (64MB)
      30. FMD: IsBlockBad - Page #: 0x0
      31. FMD: IsBlockBad - Page #: 0x20
      32. FMD: Block 0 to 20 are locked for boot loader
      33. FMD: FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
      34. FSPART: FS partition driver loaded
      35. OEM: Not cleaning system hive
      36. OEM: Not cleaning user profiles
      37. OEM: Not cleaning system hive
      38. DIO-Layout: <V1.20
      39. PM-NETDCU: STARTED
      40. +OALIoCtlHalGetHWEntropy
      41. OHCI: Version 1.2, ActiveKey = Drivers\BuiltIn\OHCI
      42. I2C: Version 2.5, ActiveKey = Drivers\Active\10
      43. PSS: Version 1.1, ActiveKey = Drivers\Active\11
      44. VDE: Version 1.0, ActiveKey = Drivers\Active\12
      45. NDIS:Version 1.0
      46. NSPI: Version 3.4, ActiveKey = Drivers\Active\17
      47. NSPI: Version 3.4, ActiveKey = Drivers\Active\18
      48. WAV: Version 1.0, ActiveKey = Drivers\Active\19
      49. CID: Version 2.8, ActiveKey = Drivers\Active\20
      50. HSMMC: Initializing the HSMMC Host ControllerHSMMC: Version 1.2, ActiveKey = Drivers\Active\21
      51. UART: Version 1.3, Key = Drivers\Active\22
      52. DEBUG: UART0 SYSINTR : 64
      53. BCS: Version 1.3, ActiveKey = Drivers\Active\35
      54. NI2C: Version 3.1, ActiveKey = Drivers\Active\36
      55. DIO: Version 2.6, ActiveKey = Drivers\Active\37
      56. USBFN: Version 1.0, ActiveKey = Drivers\Active\39
      57. USBFN: USB Serial Function Class Enabled : Serial_Class
      58. USBFN: HW_USBClocks::D0
      59. [b]LCD: Version 1.8, ActiveKey =
      60. LCD: Read registry settings from Drivers\Display\LCD
      61. LCD: Can't load
      62. Display-Mode: 2, Name Hitachi TX09
      63. Width: 240 Height: 320 Bpp: 16[/b]
      64. TCHPDD: Version 1.4, Key = HARDWARE\DEVICEMAP\TOUCH
      65. TCHKEY: Version 1.0, Key = HARDWARE\DEVICEMAP\TOUCH\VirtualKeys
      66. CheckAutoStart: Version 1.5, LaunchNum = 100
      67. NDCUCFG V 55 started. Platform: PicoCOM4
      68. NDCUCFG Open COM1: at 38400 Baud
      69. CreateFile() failed -> ERROR COM1:




      what i have to change in registry to use TX09 display