NetDCU8 display settings for EDT ETM0430005ADH6

      Please try;
      reg open \drivers\display\Samsung
      reg create key mode100
      reg set value name string "EDT ET043005"
      reg set value EFW dword 2
      reg set value BFW dword 2
      reg set value msignal dword 2
      reg set value rows dword 272
      reg set value LPP dword 272
      reg set value width dword 94
      reg set value height dword 54
      reg set value contrastenable dword 0
      reg set value contrastvalue dword 0
      reg set value type dword 6
      reg set value config dword 0x00300000
      reg set value columns dword 480
      reg set value PPL dword 480
      reg set value HSW dword 41
      reg set value bpp dword 24
      reg set value lcdclk dword 9
      reg set value VSW dword 10
      reg set value BLW dword 2
      reg set value ELW dword 2
      reg set value EnableCursor dword 0
      display mode set 100
      reg save
      Which setting did you use?
      Maybe try also "reg set value config dword 0x00700000". I did not check the data sheet:(
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.
      I tried the following settings which are working fine now.

      reg open \drivers\display\Samsung
      REM reg create key mode100
      reg open mode100
      reg set value BFW dword 2
      reg set value BLW dword 2
      reg set value bpp dword 16
      reg set value columns dword 480
      reg set value config dword 0x00700000
      reg set value contrastenable dword 0
      reg set value contrastvalue dword 0
      reg set value EFW dword 2
      reg set value ELW dword 2
      reg set value EnableCursor dword 1
      reg set value height dword 54
      reg set value HSW dword 41
      reg set value lcdclk dword 12000000
      reg set value LPP dword 272
      reg set value msignal dword 2
      reg set value name string "ETM043005ADH6"
      reg set value PPL dword 480
      reg set value rows dword 272
      reg set value type dword 6
      reg set value VSW dword 10
      reg set value width dword 95
      reg save
      reg open \drivers\display\Samsung
      display mode set 100
      reg save

      Thanks to FS-Support.

      Kind Regards.

      Daniel