Display settings for E0700G8DH6, pixel clock has to be inverted

      Display settings for E0700G8DH6, pixel clock has to be inverted

      We are using the NetDcuA5, connected to a 800x480 TFT display.
      Up to now we used an EDT display, supplied by GLYN: ET0700G0DH6.
      This TFT was changed to: ET0700G8DH6
      Using the same settings I now have shadows on my display. The supplier told me that I have to "invert the Pixel Clock".
      How can I invert the Pixel clock?
      Which of the registry settings of the display do I have to modify?

      THANK YOU

      Post was edited 1 time, last by “Dirk” ().

      Hello,

      control signals can be inverted by the bits of "config" value. Refer (any) Device Driver Doc. chapter "LCD" Table "Registry Value Config".
      Pixel Clock can by inverted by bit 22.
      Eg. config = DWORD: 00400000 -> pixel clock is active low.
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.
      I tested it and it works. Thank you.
      Where can I find and download the Device Driver documentation?


      This is a working display setting for an EDT ET0700G8DH6:

      reg open \drivers\display\LCD
      reg create key mode108
      reg set value name string "ET0700G8DH6"
      reg set value BLW dword 153
      reg set value HSW dword 63
      reg set value ELW dword 40
      reg set value BFW dword 33
      reg set value VSW dword 2
      reg set value EFW dword 10
      reg set value msignal dword 2
      reg set value rows dword 480
      reg set value LPP dword 480
      reg set value width dword 156
      reg set value height dword 96
      reg set value contrastenable dword 0
      reg set value contrastvalue dword 0
      reg set value type dword 6
      reg set value config dword 0x00700000
      reg set value columns dword 800
      reg set value PPL dword 800
      reg set value bpp dword 16
      reg set value lcdclk dword 33
      reg set value EnableCursor dword 0
      display mode set 108
      reg save
      Hello,
      Where can I find and download the Device Driver documentation?
      Goto FS Homepage -> select a product -> feature table -> klick documentation -> ... .
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.