SD-card in nboot

      SD-card in nboot

      Dear support-team,

      on armstoneA9 sd-card will not be found in nboot.
      Version:

      "F&S Nand Loader VN29 built Aug 9 2016 11:40:32"
      "armstoneA9 Rev. 1.10"

      I tried with 4GB and 2 GB micro-sd.

      Any idea? Thanks.

      EDIT: For now it seems sd-card is not working at all (even in u-boot and in kernel).

      Post was edited 1 time, last by “RSchubert” ().

      SD card still does not work in NBoot. This has rather low priority here because there are other ways to reach the same goal. But SD card does work in U-Boot and Linux. Installing software is usually done by using our update/install system in U-Boot. See section 6.4 in the Linux FirstSteps documentation. Usually you put the files on a USB stick or SD card and then you can install your system completely automatically without having to type one single character manually. You can also update U-Boot from U-Boot in this procedure, you do not necessarily need to do this from NBoot.
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.
      Do it exactly like with the kernel, just use the UBoot MTD partition instead of the Kernel partition. Download the new U-Boot image (by TFTP or from USB stick or SD card), then call:

      Source Code

      1. nand erase.part UBoot
      2. nand write $loadaddr UBoot $filesize


      Your F&S Support Team
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.