Cannot enter Bootloader menu

      Cannot enter Bootloader menu

      Hi,

      when I try the PicoMOD7A I can enter the bootloader menu:
      Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Nov 19 2014 15:45:58
      Microsoft Windows CE Bootloader for PicoMOD7A Built Nov 19 2014
      Portions copyright (c) 2012 F&S Elektronik Systeme GmbH
      Boot Loader, Version 1.14
      NBoot, Version VN20
      HW rev. 1.0

      HW-Watchdog: ON
      System ready!
      Preparing for download...
      Press >S< to step into monitor...
      HW-Watchdog: OFF

      PicoMOD7A - WindowsCE Bootloader

      :>


      But with the PicoMODA9 I cannot enter the bootmenu:
      ​INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb

      Microsoft Windows CE Bootloader Common Library Version 1.2 Built May 10 2017 11:28:15
      Microsoft Windows CE Bootloader for PicoMODA9 Built May 11 2017
      Portions copyright (c) 2012 F&S Elektronik Systeme GmbH
      Boot Loader, Version 1.30
      NBoot, Version VN32
      HW rev. 1.10

      System ready!
      Preparing for download...
      Press >S< to step into monitor...
      AUTO BOOT enabled
      HW-Watchdog: ON
      +ReadKernelRegionFromNandFlash
      Image Signature in Flash Memory found (dwSig=0x43454345)
      TOC pointer=0x8045DA78

      ROMHDR (cTOC = 0x0023da78) ---------------------
      DLL First : 0x4001efd7
      DLL Last : 0x4013f000
      Physical First : 0x80220000
      Physical Last : 0x80503ed4
      Num Modules : 32
      RAM Start : 0x80620000
      RAM Free : 0x8066e000
      RAM End : 0x941fc000
      Num Copy Entries : 2
      Copy Entries Offset : 0x80494fd4
      Prof Symbol Length : 0x00000000
      Prof Symbol Offset : 0x00000000
      Num Files : 8
      Kernel Flags : 0x00000001
      FileSys RAM Percent : 0x20202020
      Driver Glob Start : 0x00000000
      Driver Glob Length : 0x00000000
      CPU : 0x01c4
      MiscFlags : 0x0002
      Extensions : 0x80222118
      Tracking Mem Start : 0x00000000
      Tracking Mem Length : 0x00000000
      Kernel (2959kB) read from flash disk started finished in 467 milliseconds
      Kernel read from NAND
      INFO: OEMLaunch: Jumping to Physical Address 0x10220000h (Virtual Address 0x10220000h)...

      Jumping to Kernel @ 0x10220000
      INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
      Windows CE Kernel for ARM (Thumb Enabled)
      OAL: Enabling L2 cache
      OEMInit: silicon rev = 0x13
      SMP support disabled

      PicoMODA9 V2.30 - Firmware Init
      Copyright (c) 2013 F&S Elektronik Systeme GmbH
      Build: May 20 2017/15:39:45
      OAL: OEMGetRamTable TotalMemSize=512 VidMemSize=0
      OAL: HW watchdog enabled
      [OAL] MACB: Disabled
      [OAL] RestartReason: IPP
      FSPART: FS partition driver loaded
      BINFS: RegisterVolume - Mounted volume '\BINFS'
      PM-NETDCU: STARTED
      BE2: Version 1.4, ActiveKey = Drivers\Active\01
      BE2: Version 1.4, ActiveKey = Drivers\Active\04
      IPU: Version 1.4, ActiveKey = Drivers\Active\10
      NI2C: Version 1.0, ActiveKey = Drivers\Active\17
      PP: Version 1.1, ActiveKey = Drivers\Active\20
      VDI: Version 1.1, ActiveKey = Drivers\Active\21
      ENET: Version 1.5, ActiveKey = Comm\ETHNETA
      ETHMAN: Version 1.2, ActiveKey = Drivers\Active\31
      BE2: Version 1.4, ActiveKey = Drivers\Active\36
      I2C: Version 4.2, ActiveKey = Drivers\Active\37
      NI2C: Version 1.0, ActiveKey = Drivers\Active\38
      COMMDD2: Version 1.0, ActiveKey = Drivers\Active\39
      Serial: Version 1.11, ActiveKey = Drivers\Active\39
      COMMDD2: Version 1.0, ActiveKey = Drivers\Active\40
      Serial: Version 1.11, ActiveKey = Drivers\Active\40
      Serial: Port disabled. Serial debug is on !
      COMMDD2: Version 1.0, ActiveKey = Drivers\Active\41
      Serial: Version 1.11, ActiveKey = Drivers\Active\41
      TCH: Version 1.4, ActiveKey = Drivers\Active\42
      SHC: Version 1.5, ActiveKey = Drivers\Active\43
      SHC: Version 1.5, ActiveKey = Drivers\Active\44
      I2C: Version 4.2, ActiveKey = Drivers\Active\45
      WAV: Version 1.2, ActiveKey = Drivers\Active\46
      SHC: [USDHC1] SD card inserted
      NSPI: Version 3.8, ActiveKey = Drivers\Active\47
      EXTRTC: Version 1.2, ActiveKey = Drivers\Active\48
      PPU: Version 1.1, ActiveKey = Drivers\Active\49
      BCS: Version 1.4, ActiveKey = Drivers\Active\50
      DIO: Version 1.4, ActiveKey = Drivers\Active\51
      FRW: Version 1.3, ActiveKey = Drivers\Active\57
      GALCORE 4.6.9(9754) (Aug 13 2014 10:51:18)
      Major GPU: SysIntr=28 MemBases=0x130000 MMU Version=0
      2D GPU: SysIntr=29 MemBases=0x134000 MMU Version=0
      Video memory: BaseAddress=0x0 PhysBase=0x106d1000 size=0x7000000 physSize=0x0
      LCD: Version 1.4, ActiveKey = Drivers\Display\LCD
      LCD: Read registry settings from Drivers\Display\LCD
      LCD: Read registry settings from Drivers\Display\LCD
      LCD: Display-Mode 100, Name UMSH-8247MD-3T
      TchProxy: touch driver cann't be loaded. Check touch driver registry settings.
      FSMinShell: Start applications in \FFSDISK\StartUp\*.*
      NDCUCFG V 67 started. Platform: PicoMODA9
      NDCUCFG Open COM1: at 115200 Baud
      CreateFile() failed -> ERROR COM1:
      CheckAutoStart: Version 1.7, LaunchNum = 100
      SoftRTC disabled
      ENET: LinkState: FULL-DUP, 100Mbps
      ====> ENETResetEx
      ENETResetEx(*AddressingReset=1) Status=00000000
      ====> ENETResetEx
      ENETResetEx(*AddressingReset=1) Status=00000000


      How to fix this??

      I use the same terminal program (HTerm) to send "S" on startup with the "ASend" option.
      The ASend option in HTrem seems a little bit slow (repetition rate of 100ms).
      Are you using a USB-Serial dongle? Then there may be additional delays from the dongle.
      There is only a short period of time where the serial port is read, this period was longer for older boards.
      You have to use a different terminal program with a faster key repetition rate.
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.

      New

      Hello,

      the file is not included into the Image. I will upload wcelod.exe and wceldcmd.exe into the tools section in the public download area.
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.