Configuration-File for the display G084SN05 V9

      Hello, found follwing on our server this should basically work!
      Detailed hints you will get using: fs-net.de/assets/download/docu…ttings_from_datasheet.pdf

      reg open <path>
      reg create key mode100
      reg set value name string "AUO G084SN05V8"
      reg set value EFW dword 1
      reg set value BFW dword 23
      reg set value LPP dword 600
      reg set value msignal dword 2
      reg set value rows dword 600
      reg set value width dword 246
      reg set value height dword 185
      reg set value type dword 6
      rem reg set value voltage dword 33
      reg set value config dword 0x00700000
      reg set value columns dword 800
      reg set value HSW dword 64
      reg set value bpp dword 16
      reg set value PPL dword 800
      reg set value lcdclk dword 34
      reg set value VSW dword 4
      reg set value BLW dword 88
      reg set value ELW dword 40
      reg set value EnableCursor dword 0
      display mode set 100
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.
      You are right "bit-or" values:

      Value Config
      LCD_VSP 0x00100000 Vertical sync polarity: active low
      LCD_HSP 0x00200000 Horizontal sync polarity: active low
      LCD_OEP 0x00800000 Output enable polarity: active low
      LCD_CLKP 0x00400000 Clock polarity: active low

      NetDCU9 Display Version 1.02 Date 04/12/2007, Page15
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.
      Yes, normal config file, LVDS-Adapter translates just RGB signals to LVDS via HW.
      F&S Elektronik Systeme GmbH
      As this is an international forum, please try to post in English.
      Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.