i update my picocom4 to kernel XIPNKPC4_CORE_CF35_140521.bin without problem but i use TX09 display, i change mode to 2 but i have black screen.
With my previous kernel it works.
below the NDCterm:
Code
- <0>
- Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Mar 7 2013 14:18:11
- Microsoft Windows CE Bootloader for PicoCOM4 Built Mar 7 2013
- Portions copyright (c) 2009 F&S Elektronik Systeme GmbH
- Boot Loader, Version 1.8
- NBoot, Version C425
- HW-Watchdog: ON
- System ready!
- Preparing for download...
- Press >S< to step into monitor...
- AUTO BOOT enabled
- Kernel (2699kB) read from flash disk started finished in 1 milliseconds
- INFO: OEMLaunch: Jumping to Physical Address 0x301422CCh (Virtual Address 0x0h)...
- Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 14 2011 at 17:32:03
- PicoCOM4 V1.16 - Firmware Init
- Copyright (c) 2010 F&S Elektronik Systeme GmbH
- Build: May 21 2014/10:00:43
- INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
- HW-WATCHDOG: ENABLED
- FMD: NAND ID:0xec76 --> Samsung: 512MBit (64MB)
- FMD: IsBlockBad - Page #: 0x0
- FMD: IsBlockBad - Page #: 0x20
- FMD: Block 0 to 20 are locked for boot loader
- -OEMInit
- OALIoCtlHalInitRTC: Year: 2006, Month: 1, Day: 1, Hour: 12, Minute: 0, second: 0
- Time returned from OEMGetRealTime: Year: 2006, Month: 1, Day: 1, Hour: 13, Minute: 13, second: 25
- Drivers\Builtin\Serial1 - OFF
- RestartReason: Reset
- FMD: NAND ID:0xec76 --> Samsung: 512MBit (64MB)
- FMD: IsBlockBad - Page #: 0x0
- FMD: IsBlockBad - Page #: 0x20
- FMD: Block 0 to 20 are locked for boot loader
- FMD: FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
- FSPART: FS partition driver loaded
- OEM: Not cleaning system hive
- OEM: Not cleaning user profiles
- OEM: Not cleaning system hive
- DIO-Layout: <V1.20
- PM-NETDCU: STARTED
- +OALIoCtlHalGetHWEntropy
- OHCI: Version 1.2, ActiveKey = Drivers\BuiltIn\OHCI
- I2C: Version 2.5, ActiveKey = Drivers\Active\10
- PSS: Version 1.1, ActiveKey = Drivers\Active\11
- VDE: Version 1.0, ActiveKey = Drivers\Active\12
- NDIS:Version 1.0
- NSPI: Version 3.4, ActiveKey = Drivers\Active\17
- NSPI: Version 3.4, ActiveKey = Drivers\Active\18
- WAV: Version 1.0, ActiveKey = Drivers\Active\19
- CID: Version 2.8, ActiveKey = Drivers\Active\20
- HSMMC: Initializing the HSMMC Host ControllerHSMMC: Version 1.2, ActiveKey = Drivers\Active\21
- UART: Version 1.3, Key = Drivers\Active\22
- DEBUG: UART0 SYSINTR : 64
- BCS: Version 1.3, ActiveKey = Drivers\Active\35
- NI2C: Version 3.1, ActiveKey = Drivers\Active\36
- DIO: Version 2.6, ActiveKey = Drivers\Active\37
- USBFN: Version 1.0, ActiveKey = Drivers\Active\39
- USBFN: USB Serial Function Class Enabled : Serial_Class
- USBFN: HW_USBClocks::D0
- [b]LCD: Version 1.8, ActiveKey =
- LCD: Read registry settings from Drivers\Display\LCD
- LCD: Can't load
- Display-Mode: 2, Name Hitachi TX09
- Width: 240 Height: 320 Bpp: 16[/b]
- TCHPDD: Version 1.4, Key = HARDWARE\DEVICEMAP\TOUCH
- TCHKEY: Version 1.0, Key = HARDWARE\DEVICEMAP\TOUCH\VirtualKeys
- CheckAutoStart: Version 1.5, LaunchNum = 100
- NDCUCFG V 55 started. Platform: PicoCOM4
- NDCUCFG Open COM1: at 38400 Baud
- CreateFile() failed -> ERROR COM1:
what i have to change in registry to use TX09 display