SSL will nicht starten

Hallo,

der SSL Server will nicht starten:

Registry Einstellungen:
HKLM
Comm/HTTPD/SSL
CertificateSubject mycert
Port 443
IsEnabled 1

Services/HTTPD/Accept/TCP-443
SockAddr 02 00 01 BB 00 ......

Logfile:
Fri, 12 Sep 2008 11:50:17 The web server cannot initialize SSL, no SSL actions will be performed. Error code = 0x80092004

Was mache ich noch falsch?

Schöne Grüße
Manfred Domandl
InterCard

Hallo Herr Kiepfer,

ich arbeite auf einem Picomod1 "Starterpaket".
Zusätzliche Zertifikate wurden von mir installiert.

Schöne Grüße
Manfred Domandl
InterCard

Kernel:

NKP1_CF2_080527.bin




Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Feb 4 2008 11:37:45
Microsoft Windows CE Bootloader for PicoMOD1 Built Mar 3 2008
Portions copyright (c) 2006 F&S Elektronik Systeme GmbH
Boot Loader, Version 1.22
StepStone Loader, Version P119




Samsung: 256MBit (32MB)
Create partition for boot section ... Success
INFO:OALLogSetZones: g_oalLogMask: 0xb
System ready!
Preparing for download...
Press >S< to step into monitor...
AUTO BOOT enabled
+ReadKernelRegionFromNandFlash
Image Signature in Flash Memory found (dwSig=0x43454345)
TOC pointer=0x80E1BB94
Kernel read from flash disk started finished




ROMHDR (cTOC = 0x00ce2b94) ---------------------
DLL First : 0x01ed01ed
DLL Last : 0x02000000
Physical First : 0x80139000
Physical Last : 0x80e1d5a8
Num Modules : 143
RAM Start : 0x80e20000
RAM Free : 0x80e51000
RAM End : 0x82000000
Num Copy Entries : 1
Copy Entries Offset : 0x8050fc20
Prof Symbol Length : 0x00000000
Prof Symbol Offset : 0x00000000
Num Files : 72
Kernel Flags : 0x00000000
FileSys RAM Percent : 0x80808080
Driver Glob Start : 0x00000000
Driver Glob Length : 0x00000000
CPU : 0x01c2
MiscFlags : 0x0002
Extensions : 0x8013a14c
Tracking Mem Start : 0x00000000
Tracking Mem Length : 0x00000000
Kernel read from NAND
INFO: OEMLaunch: Jumping to Physical Address 0x30141FE8h (Virtual Address 0x80141FE8h)...







Windows CE Kernel for ARM (Thumb Enabled) Built on Feb 8 2007 at 23:36:51
ProcessorType=0920 Revision=0
sp_abt=ffff5000 sp_irq=ffff2800 sp_undef=ffffc800 OEMAddressTable = 80141eb0
PicoMOD V1.12 - Firmware Init
Copyright (c) 2006 F&S Elektronik Systeme GmbH
Build: May 27 2008/16:32:17
DCache: 8 sets, 64 ways, 32 line size, 16384 size
ICache: 8 sets, 64 ways, 32 line size, 16384 size
GPFCON=0x2a82, EXTINT0=0x1
OEMInit: SDRAM = 32 MB
KITL: OFF
Samsung: 256MBit (32MB)
Sp=ffffc7cc
OEMIoControl: Unsupported Code 0x10100b4 - device 0x0101 func 45
OEMIoControl: Unsupported Code 0x101008c - device 0x0101 func 35
Samsung: 256MBit (32MB)
OEMIoControl: Unsupported Code 0x1010104 - device 0x0101 func 65
F3S_FSD: Checking serial number...
F3S_FSD: Failsafe Flash File System - V2.7
Samsung: 256MBit (32MB)
F3S_FSD: Volume successfully mounted at \FFSDISK (size=15 MB)!
OEM: Not cleaning system hive
OEM: Not cleaning user profiles
AC97: Can't read vendor id of audio codec
COM: Version V2.0, ActiveKey = Drivers\Active\04
COM: Version V2.0, ActiveKey = Drivers\Active\06
OEMIoControl: Unsupported Code 0x10100d0 - device 0x0101 func 52
OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62
DM9CE: DM9000/9000A/9010 driver v3.2.9 for WinCE 5.0>
DM9CE: StationAddress [ 00-05-51-01-8b-30 ]
MBD: ActiveKey (copy) = Drivers\Active\25 (@ 0x000566D0)
SDIO: Reset ...ok
SDHC: SetClockRate=100000
NI2C: Version 1.6, ActiveKey = Drivers\Active\28
DIO: Version 1.1, ActiveKey = Drivers\Active\29
DIO: ActiveKey (copy) = Drivers\Active\29 (@ 0x00059510)
Display-Mode: 100, Name Hitachi TX09
Width: 240 Height: 320 Bpp: 16
OEMIoControl: Unsupported Code 0x10100fc - device 0x0101 func 63
Backlight is disabled in registry
InitializeDisplayHardware Complete
Lyg.p: Layout Manager successfully initialized to 2
MSIM: IM_ReadRegistry read KB 5
Indicated RS232 Cable Event
OEMIoControl: Unsupported Code 0x10100f8 - device 0x0101 func 62
DynRotate(): m_nScreenWidth=320, m_nScreenHeight=240, angle=0x4
NDCUCFG V: 034 started. Platform: PicoMOD1
CreateFile() failed -> ERROR COM1:
NDISPWR:: Found adapter [DM9CE1]

Hallo,

ok, SSL funktioniert nun. Das Zertifikat wurde von mir fälschlicherweise in den Kontainer "Trustet Certificates" gespeichert.

Schöne Grüße
Manfred Domandl
InterCard