Hello,
I have made a new kernel, but during download image it hangs always at the same place.
Have you an idea, what kind of settings are missing?
Code
- HW-Watchdog: OFF
- Waiting for USB download
- Full Speed detected
- Full Speed detected
- Download file information:
- -------------------------------------------------------------------------------
- [0]: Address=0x80139000 Length=0xF19CC4 Name=C:\WINCE600\OSDesigns\PC4_LJETneo_V3.0.0.01\TestDesign\TestDesign\RelDir\PicoCOM4_ARMV4I_Debug\NK.bin
- INFO: Changed start address for C:\WINCE600\OSDesigns\PC4_LJETneo_V3.0.0.01\TestDesign\TestDesign\RelDir\PicoCOM4_ARMV4I_Debug\NK.bin to 0x80139000.
- ####################################################################################################################################1 files tranfered
- INFO: Write image at 0x80139000 size 0x00f19cc4 to NAND Flash
- Create partition for boot section ...
- Success
- Create partition for kernel section ...
- Success
- Create partition for FFSDISK section ...
- Success
- WriteRegionsToNandFlash+r
- Writing single region/multi-region update, dwBINFSPartLength: 15834308
- INFO: BP_OpenPartition: dwBINFSPartLength =0xF19CC4).
- dwRegionStart=0x80139000).
- dwRegionLength=0xF19CC4).
- INFO: BP_SetDataPointer: Set data pointer in BINFS partition (offset=0x0).
- INFO: WriteRegionsToNandFlash: Write region S partition (start=0x80139000, length=0xF19CC4).
- Writing image to flash complete.
- AUTO-BOOT enabled
- All files flashed
- OEMReadData: 0x2B1087
- Leaving DownloadImage()
- dwImageStart=0x80139000, dwImageLength=0xf19cc4, dwLaunchAddr=0x8014244c
- OEMAfterDownload(dwAction=0x0)
- ROMHDR at Address 80139044h
- INFO: OEMLaunch: Jumping to Physical Address 0x3014244Ch (Virtual Address 0x8014244Ch)...
- Windows CE Kernel for ARM (Thumb Enabled) Built on Apr 5 2011 at 17:47:22
- PicoCOM4 V1.00 - Firmware Init
- Copyright (c) 2010 F&S Elektronik Systeme GmbH
- Build: Jun 17 2011/16:23:17
- INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
- FMD: NAND ID:0xec76 --> Samsung: 512MBit (64MB)
- FMD: IsBlockBad - Page #: 0x0
- FMD: IsBlockBad - Page #: 0x20
- FMD: Block 0 to 20 are locked for boot loader
- -OEMInit
- OALIoCtlHalInitRTC: Year: 2006, Month: 1, Day: 1, Hour: 12, Minute: 0, second: 0
- Time returned from OEMGetRealTime: Year: 2006, Month: 1, Day: 1, Hour: 15, Minute: 58, second: 0
- Drivers\Builtin\Serial1 - OFF
- RestartReason: Reset
- FMD: NAND ID:0xec76 --> Samsung: 512MBit (64MB)
- FMD: IsBlockBad - Page #: 0x0
- FMD: IsBlockBad - Page #: 0x20
- FMD: Block 0 to 20 are locked for boot loader
- FMD: FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
- -S--L-
