We're planning to migrate from V1.06 to V1.12. Sometime in the latest kernel when the board is powered up, WinCE doesn't boot up. Do you know what could be the problem?
I have to say, it used to work properly in V1.06.
Cheers
Reset problem
-
-
Hello,
sorry we don't know anything about this behavior.
What does this mean "WinCE doesn't boot up".
Does the system hang while booting?
Or does it reboot periodically?Can you provide us more details:
Serial debug output?
Which interfaces are connected or which interfaces are not connecte or terminated?Thanks.
-
It doesn't start at all, I'm not sure if it hangs or there is a hardware problem. following is the complete debug information when it crash:
Display MoreCode- Microsoft Windows CE Ethernet Bootloader Common Library Version 1.1 Built Feb 16 2012 15:13:12
- Microsoft Windows CE Bootloader for PicoCOM4 Built Feb 16 2012
- Portions copyright (c) 2009 F&S Elektronik Systeme GmbH
- Boot Loader, Version 1.6
- NBoot, Version C426
- HW-Watchdog: ON
- System ready!
- Preparing for download...
- Press >S< to step into monitor...
- AUTO BOOT enabled
- Kernel (2547kB) read from flash disk started finished in 1 milliseconds
- INFO: OEMLaunch: Jumping to Physical Address 0x301422CCh (Virtual Address 0x0h)...
- Windows CE Kernel for ARM (Thumb Enabled) Built on Sep 14 2011 at 17:32:03
- PicoCOM4 V1.11 - Firmware Init
- Copyright (c) 2010 F&S Elektronik Systeme GmbH
- Build: Oct 29 2012/12:44:30
- INFO:OALLogSetZones: dpCurSettings.ulZoneMask: 0xb
- HW-WATCHDOG: ENABLED
- FMD: NAND ID:0x2076 --> ST: 512MBit (64MB)
- FMD: IsBlockBad - Page #: 0x0
- FMD: IsBlockBad - Page #: 0x20
- FMD: Block 0 to 20 are locked for boot loader
- -OEMInit
- OALIoCtlHalInitRTC: Year: 2006, Month: 1, Day: 1, Hour: 12, Minute: 0, second: 0
- Time returned from OEMGetRealTime: Year: 2006, Month: 1, Day: 1, Hour: 12, Minute: 4, second: 26
- Drivers\Builtin\Serial1 - OFF
- RestartReason: Reset
- FMD: NAND ID:0x2076 --> ST: 512MBit (64MB)
- FMD: IsBlockBad - Page #: 0x0
- FMD: IsBlockBad - Page #: 0x20
- FMD: Block 0 to 20 are locked for boot loader
- FMD: FMD_OEMIoControl: unrecognized IOCTL (0x71c24).
- FSPART: FS partition driver loaded
- OEM: Not cleaning system hive
- OEM: Not cleaning user profiles
- OEM: Not cleaning system hive
- DIO-Layout: >=V1.20
- PM-NETDCU: STARTED
- +OALIoCtlHalGetHWEntropy
- OHCI: Version 1.2, ActiveKey = Drivers\BuiltIn\OHCI
- I2C: Version 2.5, ActiveKey = Drivers\Active\10
- PSS: Version 1.1, ActiveKey = Drivers\Active\11
- VDE: Version 1.0, ActiveKey = Drivers\Active\12
- NDIS:Version 1.0
- WAV: Version 1.0, ActiveKey = Drivers\Active\17
- CID: Version 2.8, ActiveKey = Drivers\Active\18
Thanks for your help
-
I've realized that I wrote we're planning to use V1.12 but the debug info is for V1.11. I should mention that same is happening in V1.12.
-
