Hello
Where can I find the actual TFT display settings files (e.g. TCG057.txt) for the NetDCU8?
Thanks a lot.
Kind Regards,
Daniel
Actual TFT display settings files for NetDCU8
-
-
Hello,
in general you can use any file provided for TCG057. The only important difference between "newer" and "older" boards is the registry path (refer Device Driver Dokument). Newer and future boards always use HKLM/Drivers/Display/LCD/ as path older board use HKLM/Drivers/Display/<CPU Manufactory>.
Following should work for NetDCU8:
Display MoreCode- reg open \drivers\display\samsung
- reg create key mode100
- reg set value name string "Kyocera TCG057VG"
- reg set value EFW dword 1
- reg set value BFW dword 16
- reg set value msignal dword 2
- reg set value rows dword 480
- reg set value LPP dword 480
- reg set value width dword 115
- reg set value height dword 86
- reg set value contrastenable dword 0
- reg set value contrastvalue dword 0
- reg set value type dword 6
- reg set value config dword 0x00700000
- reg set value columns dword 640
- reg set value PPL dword 640
- reg set value HSW dword 96
- reg set value bpp dword 16
- reg set value lcdclk dword 25
- reg set value VSW dword 16
- reg set value BLW dword 60
- reg set value ELW dword 40
- reg set value EnableCursor dword 1
- display mode set 100
- reg save
- <enter:>
Hope this helps.
