Hey,
I cannot find a install version for windows media player for windows ce 5.0, where can I download?
Regards
Hey,
I cannot find a install version for windows media player for windows ce 5.0, where can I download?
Regards
THX (speed in action!), can I use this image together with Compact Framework 2.0 VB.net?
No, CF 2.0 is not included. But i will prepare an image. It will take one hour. Please wait.
Regards
Holger
You can download a WinCE image with MediaPlayer and CF 2.0 from
http://www.fs-net.de/download/…l/NK8Media_CF2_060403.zip
Befor you install this image on NetDCU8, you should increase the Partition for the image. Do the following steps:
1.) Make a connection between your PC and COM1: of NetDCU8 with DCUTermi.exe
2.) Step into bootloader monitor by pressing and holding S during boot.
3.) Start NetDCUUSBLoader.exe, modif NBI file for new BIN file
4.) Adjust partition for WinCE image on NetDCU8 with command P to 16 MB
5.) Start USB download with commend DU
6.) Check NetDCUUSBLOader for toggling LED from RED to GREEN
7.) Start download and wait for success.
Regards
Holger
I Just uploaded the image and the windows media player is running, but as I am opening an mpeg (Sorenson compressed) I get first a warning and than an error,
The warning says:
Audio hardware is missing or disabled:
and by pressing OK the error appears:
"Unknown error has occured (0x8007000e)"
What can I do, I am using NETDCU8 Starterkit,
For info, I tried: avi, mpg, wmv files same error occures, also I tried different sizes from 1MB to 4MB
THX and Regards
Found the answer, the error code describes "Out of Memory", simply adjust the memory allocation in System panel and that's it.
Regards
We have a new version of NetDCU8 WinCE image with MediaPlayer on the internet. It solves problems with regsitry, ffsdisk and ethernet.
Download it from
http://www.fs-net.de/download/…l/NK8Media_CF2_060407.zip
Regards
Holger
Do you have also an image with media player 10? because with version 10 ocx is completly supported and updated, very important. Media player 10 is not available to public only as integrated update for distributors.
Can you help me?
Where I can find the NetDCUUSBLoader.exe?
THX,
Regards
Selinger
Quote from "froelich"Display MoreYou can download a WinCE image with MediaPlayer and CF 2.0 from
http://www.fs-net.de/download/…l/NK8Media_CF2_060403.zip
Befor you install this image on NetDCU8, you should increase the Partition for the image. Do the following steps:
1.) Make a connection between your PC and COM1: of NetDCU8 with DCUTermi.exe
2.) Step into bootloader monitor by pressing and holding S during boot.
3.) Start NetDCUUSBLoader.exe, modif NBI file for new BIN file
4.) Adjust partition for WinCE image on NetDCU8 with command P to 16 MB
5.) Start USB download with commend DU
6.) Check NetDCUUSBLOader for toggling LED from RED to GREEN
7.) Start download and wait for success.
Regards
Holger
You can download NetDCUUsbLoader from here:
http://www.fs-net.de/download/…/NetDCUUSBLoaderSetup.zip
Regards
Holger