Hello,
1) i suggest the problem with CreateProcess() is that the process is not called "httpsvr"!
2) The driver is loaded by registry under HKLM\Services\HTTPD. I suggest you can prevent driver from loading by insert registry value "flags(Dword)=4, "(or simple delete the DLL value).
Hello,
my collegue has already answered you by a detailed email.
Why do you think the connection list is not right?
Note, RGB and numbering are only meaningful for TFT LCDs for passive LCDs the data is clocked serial. Which pins are used depends on the platform and RGB numbering serves only the assingment and has no physical meaning (see also other passive LCDs in the connection list).
Did you already test this connection?
Hallo,
das Systempasswort können Sie nicht direkt in die Registry eintragen es wird auch nicht im "sichtbaren" Bereich gespeichert. Weitere Infos siehe http://fs-net.de/phpBB2/viewtopic.php?t=836.
Hallo,
wenn Sie den Adapter direkt auf der Displayschnittstelle auf dem Board anbringen müssen Sie nichts beachten, d.h. NetDCU8 und NetDCU10 haben die gleiche Belegung für alle Displays (das gilt für alle unsere NetDCUx Boards wenn Sie TFT LCDs anschließen für passive Display gilt es nur bedingt).
Wenn Sie den Adapter auf dem StarterKit anbringen, müssen Sie den Steckverbinder zur NetDCU auf dem Adapter jeweils auf der anderen Seite (botton<->top) anbringen und beim StarterKit "StartInf4" darauf achten das Adapter.Pin1=NetDCU.J3.Pin1 ist (der Stecker auf dem Kit hat mehr als 34 Pins).
Hello,
NetDCU6 GPIOs (CMOS) can deliver max. 4mA (max. 3.3V level). I suggest this is enough to enlighten a standard 3mm LED (dont forget the series resistance!).
Hello,
http://fs-net.de/phpBB2/viewtopic.php?t=458&highlight=httpd refers the same subject. Is this a possible solution?
Hello,
i suggest you should use an image which includes InternetExplorer (and additional libraries and registry settings). At the time such an image is not available contact <!-- e --><a href="mailto:sales@fs-net.de">sales@fs-net.de</a><!-- e --> for request.
But you can also browse in the www. for a html viewen for windows ce maybe there exits an other solution.
Hello,
QuoteI would need to use GPIO 0-12 as digital input. ...
an easy way to configure IO ports is providesd by WinNDCUCfg.exe, see tools section at http://www.fs-net.de/download/bin/.
Hallo,
QuoteI tried to install FTP server by using the .CAB you aforementioned. I have no display in my NetDCU10 so I used the /NOUI parameter on wceload.exe. After doing that, nothing seems to happen. No registry changes are acomplished (as I can seen through ndcucfg.exe).
I'm trying to install it in a telnet session.
I test it and it works!
1. i enter into telnet: wceload \noui ftpd.cab.
2. i check ffsdisk and find ftpd.dll
3. i check registry "HKLM\Comm\ftpd", the settings are done.
4. i reboot and "ftp:\\<ipofnetdcu> succeeds
Hello,
Quote- How could I add HTTP server? And FTP server? Any other platform module?
- What kind of changes could I perform to the platform for my present and/or future purposes?
How to install modules is shown at http://www.fs-net.de/phpBB2/viewtopic.php?t=669. For ftpd we have a installtion file which you will find here http://www.fs-net.de/phpBB2/vi….php?t=825&highlight=ftpd. As a general rule we do not distribute single DLLs so you have to wait until WebServer is available in the standard image. But i suggest you will find httpd.dll (for ARM) in the www and can install the module with http://msdn2.microsoft.com/en-us/library/aa923231.aspx.
Quote-How should I modify ceConfig.h in order to make changes in the platform?
This file is only for information. You can not built your own kernel.
Hello,
Quote- In my NetDCU10, as I received it from my local distributor, web server is not active (thus I get no response to <!-- m --><a class="postlink" href="http://netdcu10_ip">http://netdcu10_ip</a><!-- m -->).
Sorry, i was wrong. HTTPD is not included on NetDCU10 standard kernel right now. I will inform our system developer for this purpose.
Quote- ndcucfg: OK. I have configured my application to run at boot successfully. Anyway, where could I put my application (beside of for example "\Storage Card")?
You can put your application also in the flash on NetDCU10. By default the flash disk is called "ffsdisk" and it is visible under the root directory.
Hallo,
Quote- I need NetDCU10 to have a HTTP server. How could I do this? Would I have to create a new platform (through Platform Builder)?
A HTTP server runs by default. Enter "HTTP://<ipofnetdcu>" in IE to connect. See also http://fs-net.de/phpBB2/viewtopic.php?t=34&highlight=http.
Quote- How could I modify the registry (for example in order to get my program started automatically at boot)?
You could modify registry using "ndcucfg.exe" (see document "First Steps NetDCU10") or use the "Remote Registry Editor" which is a part of VS2005. If "ndcucfg.exe" did not start on COM1: step into the bootloader and disable the debug output by command "O". For launch program after booting see http://fs-net.de/phpBB2/viewtopic.php?t=61&highlight=launch.
Quote- How could I specify which modules/features of Windows CE are included in my image?
Use ceconfig.h.
Hello,
ftpd is not installed by default. You will find the files on CD or here http://fs-net.de/phpBB2/viewtopic.php?t=35&highlight=ftp (NetDCU8/10 have both ARM architecture).
Hello,
for application installation
- you can create a cabinet file (using e.g. the "WinCE Cab Manager" from http://www.ocpsoftware.com.
- you can run a batchfile (for copy files and run "ndcucfg" in batchmode).
In both cases you start installation remotly or local controlled.
We also offer a script controlled tool which performs installation/update automatically (via SD- or USB memory). In case of interest contact <!-- e --><a href="mailto:sales@fs-net.de">sales@fs-net.de</a><!-- e --> for detailed information.
Hello,
there is now available an additional software for SNMP support on NetDCU8/10 (CAB for installtion, SDK, sample). This software is not free of charge. For details please contact our sales department (<!-- e --><a href="mailto:sales@fs-net.de">sales@fs-net.de</a><!-- e -->).
Hello,
by default the port is registered as "device". You need settings outlined under http://fs-net.de/phpBB2/viewtopic.php?t=17&highlight=usb.
Hello,
now a new UDP driver is available which also supports "2-Bit quadrature code" (like the 62S series UDPs from Grayhill).
Hallo,
das sollte alles keine Problem sein. Löschen Sie die Registry und spielen Sie das Konfig.file für die NetDCU6 auf (einfach richtigen Pfad für den Modekey eintragen (\drivers\display\Au1100)).
