Posts by schliz

    ndcucfg -B<file>



    Is there any possibility in file: <file> to set any comments, like
    REM TEXT or whatever without getting:
    ERROR 100: Syntax Error


    Thank you


    Georg

    I am working with 2 boards.
    1. version V1.17
    2. version V1.24


    On board 1, if I have an usb stick plugged in before booting, and I boot the board, the hard disk is not necognised.
    It is only recognised if I unplug it and plug it in again.


    On board Nr.2 the hard disk is recognised straight after booting, I don't have to unplug the stick.


    Is the version the difference?


    Thank you


    Georg

    I now deinstalled ActiveSync.


    When I try to connect I get the error message ActiveSync is not installed.


    Do I have to do any other settings?



    Thank you
    Georg

    Yes, I did. I only followed the steps in the document.


    If I have a connection via ActiveSync, set the settings for "use specific IP address", unplug the usb cable I am able to debug over ethernet.
    But not without connecting first via ActiveSync.


    What is wrong?


    Thank you


    Georg

    All the time I used active sync for debugging over usb.
    Now I can not use usb for debugging anymore, and I would like to use debugging over ethernet.



    I've got Visual Studio 2005


    I read your file regarding "Connect VS 2005 to NetDCU8 using LAN" I followed the steps.


    1. I copied the files
    2. I ran conmanclient2.exe
    3. I set changes in VS2005 (boards IP 192.168.0.70)
    4. I ran cMaccept.exe


    but always I got:


    Das Gerät ist nicht bereit. Wenn das Ziel ein ActiveSync-Gerät ist, überprüfen Sie, ob die ActiveSync-Verbindung aktiv ist.


    1>Fehler beim Verbinden mit dem Gerät.


    What can I do?
    Active Sync is still installed on my PC.


    Thank you


    Georg

    Dear Mr. Zutter!


    Let's say we would like to have a kernel without the .Net framework.


    1. Is this possible?
    2. Is it possible to use platformbuilder create a platform, and than include your BSP using BSP wizard?


    Thank you
    Georg

    1) I have to report a mixup:


    I found out that you implemented the functionality for:

    Quote


    serial debug on
    serial debug off


    but if you type serial debug on and reboot, serial debug is off and vice versa. :-)


    2) Is there any information about the new features? In history, there is no information.


    Thank you
    Georg

    Kernel questions:



    1. On my NetDCU8 board, some time ago I downloaded kernel NK82_CF2_060518. Now I downloaded NK82_CF_061024.bin. Can I be sure, that the old kernel is completely deleted?


    2. Is there an information about the differences between the kernels you offer? Which functionality they contain, and if they are Core or Professional model?


    3. Is it possible to create a kernel using platform builder. Do you get as well a bin file at the end?


    Thank you
    Georg

    Ram size in System Properties shows 17840 KB RAM.
    NetDCU8 should have 32000 KB of RAM is the rest for the OS?


    Thank you
    Georg

    As well command:

    Code
    1. boot set OY - Disable debug output during boot


    results in the errormessage:

    Quote

    ERROR 100: Syntax error


    What's my mistake?


    Thank you
    Georg

    Dear Mr. Fröhlich,


    I know that, and it works, but I don't want to use bootloader. If you want to set up a series of boards, for every board you would have to step into bootloader first as an additional step.


    Thank you very much.
    Georg

    I need all 3 serial interfaces, therefor I have to disable debut output.


    I don't want to use the bootloader.


    In ndcucfg I tried command:

    Code
    1. serial debug off
    2. reg save


    It did not work, I get all debug output messages, and


    CreateFile() failed -> ERROR COM1:


    so I am not able to use COM1 for example using ndcucfg.exe on port 1.


    What can I do?


    Thank you
    Georg

    In \Windows
    I was able to locate msim.dll,


    but I could not find any LargeKB.dll


    Is there a possibility to get the LargeKB.dll and to place it to \Windows and set the registry entries?


    Or do you have any different kernel version including a large keyboard?


    Thank you very much in advance


    Georg