Posts by fs-support_MW


    sorry this was an confusion of our Documentation. We update the Hardware Documentation with an correct table of the SPI Pins.

    The SPI's of the board can be used in Slave and Master mode.


    normally we got this 3D model on the download area of our homepage. Unfortunately we currently have problems with this area. We are working on eliminating these problems as soon as possible.

    I will provide you the 3D model on your E-Mail.

    Your F&S Support Team

    There may be various problems after the update to Windows 10. The solutions to some of the problems are listed here:

    Problem 1:
    The USB drivers for F&S boards which are needed to use NetDCUUSBLoader.exe are not installed, because the driver has no signature.
    Start Command prompt:
    "shutdown.exe /r /o /f /t 00" -> The PC will make an Restart
    Choose the following options:
    "Advanced options"
    "Startup Settings"
    Type "7"
    Now you can install the driver

    Problem 2:
    The installation of .Net FrameWork 3.5 fails.
    Delete everything under: C:\Windows\SoftwareDistribution\Download
    Plug in the Windows 10 Installation Stick
    From Admin Command prompt, run:
    "Dism /Online /Cleanup-Image /StartComponentCleanup"
    "DISM /Online /Enable-Feature /FeatureName:NetFx3 /All /LimitAccess /Source:D:\sources\sxs"

    Problem 3:
    Remote Desktop doesn't work
    Windows Control panel
    Windows Firewall
    Allow a programm or feature through Windows Firewall
    Now activate Remote Desktop

    Other known issues will be added in the future.

    You can connect the RTC battery exactly the same way as connecting it to a ArmStoneA5.
    The armStoneA9R2 provides an 5 pin header to connect VBAT on pin 2. Optionally there is an 10 pin header, where you can connect the RTC battery on pin 1 and 2.

    Your F&S Support Team

    Dear Joachim,

    the efusA9-Windowssoftware doesn´t support the RTC yet.
    In future Versions the function will be implemented.

    Best regards