There seems to be a problem with the ADP-NT24V power adapter.
I connect the adapter with a 24V power supply and a 3V battery then i get a slowly raising battery voltage for the A5, it reaches the 3V after approx. half an hour.
When I disconnect the 24V it rapidly falls to around 0.5-0.6V, which resets the clock, since at least 2.5V battery voltage is needed.
What battery do I need for the ADP-NT24V? I already tried 12V which didn't change much.
I checked the hardware documentation of the A5.
In the documentation it says the power supply of the battery is 2.5-3.3V.
Is it possible that the RTC loses power and is reset if the battery voltage drops below 2.5V?
ping <Server name> => does not work
ping <IP address> => works
net use * \\<Server name>\<Folder name> /user:domain\username => gives me the log on dialog and i can insert the password but it always fails to log on
net use * \\<IP address>\<Folder name> /user:domain\username => gives me "Command failed: status 53"
NetBIOS over TCP is disabled and I cannot enable it in the registry.
The clock and date settings are always set to 2006-01-01 12:00:00 after a power loss, even with the battery connected.
It seems that the clock is working with the battery but only for a short period of time.
This is a major problem for us since our applications are dependent on the time.
I cannot connect to a shared network path with WEC2013. When I try to connect I get the "Logon" window but it always fails even with correct username, password and domain.
If I use the "net use" command i get "Command failed: status 53"
This worked fine with WEC7.
Hi,
is it possible to deploy a SDK for WEC7 (armStoneA5) for VS2012/VS2013?
Currently we are developing on VS2008 (for embedded projects) but our company plans to switch to VS2012/2013.
