Posts by Kaiser

    The error happens only when I plug in the stick and remove it again quickly (before the update window is visible).
    When I let in in for a few seconds, the update window appears and Update.exe is executed correctly, even if I remove the usb stick.
    Maybe this is a system problem?


    How can I detect the version? In properties there is no version.
    It's generated on 7. 7. 2009
    changed on 26. 3. 2009
    Size is 22.016 Bytes and 22.528 Bytes on usb stick.
    It's in \NetDCU6 folder on the usb stick.
    How to create a complete debug trace?


    Also a problem could be the size of an usb stick. When it ist larger, it needs more time to detect an USB stick.

    Hello,


    maybe there is a bug in application Update.exe?
    When I start display on NetDCU6 and with reg parameter Launch100 = CheckAutoStart.exe,
    the USB listener is activated. When I plug an USB stick in and after one scond out, I get an
    "Fatal Application Error".

    Code
    1. Program: Update.exe
    2. Exception: 0xC0000005
    3. Address: 8003E24C


    Maybe you can reproduce that?
    Is that an system tool or from F&S?


    Best regards

    Hello,


    after a complete new install board now starts again. A new kernel flash was not enough. Just after the bootloader options C, N, P, DE the system started again. Don't know why. Byt the way, maybe I found a bug? During installation I had following output:


    Maybe the new bad block caused the problem?
    Anyway - now the suspend entry in start menu is disabled. I don't need it anyway.

    Hello,


    yes I can step into the bootloader.
    All settings seems to be fine.
    here are the outputs:



    Should I try to flash a new kernel? Or first reset the settings, and if yes which one?
    Maybe the registry is enough?

    Hello together,


    through an oversight I have pressed the suspend entry in the start menu. The display become black and nothing worked.
    After switch off an on again the display still stays black. I can't start Wince again.
    The last entry in bootloader is:

    Quote


    Kernel read from flash disk started finished in 11000 milliseconds
    Kernel read from NAND
    INFO: OEMLaunch: Jumping to Physical Address 0xA01084D4h (Virtual Address 0x0h)...


    How to start WinCE again?


    Thanks a lot in advance...

    Hello,


    I have changed on my hardware the board (from NetDCU6 to NetDCU11). Now I have detectet different behavior on touch-panel.
    On NetDCU6 the touch was more sensitive than on NetDCU11. On NetDCU11 I have to press much stronger to execute something like a button...
    Are there some settings in registry or somewhere else to change behavior of touch? Or what else could be there a problem?


    Thanks a lot in advance,


    Kaiser

    Hello,


    I would like to show help from my application. What is the best way?
    I have found some help for the tool "peghelp.exe" but this is not installed.
    Is it better to start internet explorer to show html help?


    Thanks a lot, Kaiser

    Hello,


    is there a possibility to show a simple text message on display (WinCE 4.2) when I am logged in over telnet on a console?
    For example I would like to inform shortly user on display that action by me has finished and he can continue work. Just a small text message in a window would be enough.


    If there are no system tools - how to program it by myself? I wrote a console tool with a simple call of MessageBox(xxx) but that's modal. A non modal solution would be better. Any ideas?


    Thanks a lot and best regards,


    Andy

    Hello together,


    is there a convenient way to start a file from USB automatically?
    Is there a finished solution I can use or do I have to program a tool, register it in the registry-autostart mechanism and wait for "USB-In" event?
    Are there other, better solutions?


    Thanks a lot in advance,


    Kaiser

    Hallo,


    ich habe ein ähnliches Problem mit der Systemfunktion zum Reboot, allerdings auf einem F3S Kernel (Version 2.03). Rufe ich die Funktion

    Code
    1. KernelIoControl(
    2. IOCTL_HAL_REBOOT,
    3. NULL,
    4. 0,
    5. NULL,
    6. 0,
    7. NULL);


    auf, erhalte ich im darauffolgenden Neustart folgende Ausgabe:



    Anschließend tut sich nichts mehr. Erst nach einem Neustart wird wieder regulär gebootet.
    Weiß jemand Rat?



    Grüße, Kaiser

    Hello,


    is there a VNC Server for this board available?
    I remember I read long time ago something about VNC but could not find any more?
    Would be nice to control the display via vnc client on a desktop pc.
    Are there other solutions? The ZoomIn tool is ok, but not supproting any actions to change the current view.


    Thanks a lot in advance


    Andy

    Ok,


    but what's about the start of the "Date/Time properties" tool? Can someone tell me, how to start it manually by own program?
    I discovered that I can start it under WinNT with a call:

    Code
    1. control date/time

    But under WinCE control.exe does not accept any parameter and shows only the main menu.


    Thanks a lot, Kaiser

    Hello,


    is it possible to start the "Date/Time properties" tool, as by the control.exe program, by a own program? I've looked in the windows directory, but didn't found a tool which starts this tool.
    Or is it possible to use an existing timezone picker in an own program - I haven't found one, just for date and time.


    BTW: Is the Time statement at the top of the forum correct?
    "Alle Zeiten sind UTC + 1 Stunde [ Sommerzeit ]"
    In Wikipedia I found following:
    "Die Standardzeit in Deutschland, Polen, Österreich, der Schweiz und Italien ist die Mitteleuropäische Zeit (MEZ), die gleich der UTC plus einer Stunde ist. Das Militär bezeichnet diese auch als Alfa[1]-Zeit (A). Während der Sommerzeit gilt die Mitteleuropäische Sommerzeit (MESZ/engl. CEST), die der UTC plus zwei Stunden entspricht. Im militärischen Gebrauch wird diese auch als Bravo-Zeit (B) bezeichnet."
    So it should be UTC + 2 ???


    Thanks a lot in advance, Kaiser

    Hello,


    I also use the firefox browser. When I click on the link "click (here)", then a new tab ist being opend and displays the main index page.
    I also use adblock plus. but when I deactivate it, its the same behaviour.


    Regards, Andy

    Hello again,


    now it works - but only when I press on the second link directly (...php?t=821)!
    When I press your link (here click), then I will be linked to index page as before.



    Regards, Kaiser