replacement of the DM9000 chip restored the operation of the NetDCUA8 board
Posts by Salo
-
-
The Sotek company https://www.sotec.eu/en/products/td14/ uses NetDCUA5 and NetDCUA8 for the production of TD10 and TD14. We don’t think that they are doing repairs on an elementary level. OK. we understand you. try to check the matching transformer and LAN chip DM9000E
by reinstalling them from the working board.
-
Good afternoon.
Problem with NetDCU8. The board works as part of the TD-10 punch. Lost communication with the board. ETH indicator does not light when a network cable is connected. What could be the reason? a software or hardware problem. ?? There are already two boards under repair. network problem
-
Good afternoon, dear fs-support_ZU. I managed to start the screen. all OK. usual carelessness. Incorrectly wrote the variable "colums" and it was necessary "columns" Thank you for your desire for help. With respect, Igor!
-
more than 800? can not be. When I wrote down your parameters at https://www.fs-net.de/assets/d…brid/VGG804809_Vybrid.txt, the screen was normal, just a gray bar interfered.
here are my options
reg set value name string "Evervision VGG804806"
reg set value EFW dword 8
reg set value bfw dword 4
reg set value msignal dword 2
reg set value rows dword 480
reg set value LPP dword 480
reg set value width dword 115
reg set value height dword 86
reg set value contrastenable dword 1
reg set value contrastvalue dword 0
reg set value type dword 6
reg set value config dword 0x00700000
reg set value columns dword 800
reg set value PPL dword 800
reg set value HSW dword 32
reg set value bpp dword 16
reg set value lcdclk dword 33
reg set value VSW dword 2
reg set value BLW dword 60
reg set value ELW dword 40
reg set value EnableCursor dword 0
display mode set 100
reg save
maybe I was mistaken in some parameter. I’ll check again
-
"rows" and "LPP" to 600. If you set the value to 600 then the screen increases vertically, why? I can not understand.
Which command from the registry can call all the screen parameters?
in the window FSBoardConfig for some reason there is an extension of the screen 640/480. and in the registry the variables "PPL" and "Colums" are 800
probably this is a 800 * 480 screen
-
good afternoon! thanks for the advice. You're right. Missing variable msignal dword 2. After the changes, the screen got better. The touchscreen works. only a new problem appeared. A black strip of 20 mm appeared on the right side of the screen. What variable do you think the error is.?
-
made your parameters. The screen is deployed around the entire perimeter of 800 to 480. Here are just a half of the screen gray background. and the cursor disappeared from usb
There is a cursor, only it has become invisible.
The cursor is restored.
Sorry, our screen is 800 * 480. VGG804807-6UFLWB
[IMG:https://pixs.ru/image/OuhFI]
-
Good afternoon! thanks for the answer. No changes were made to the registry. Waiting for advice from professionals
Sorry for the incompetence. Could you tell us in detail how to make changes to the registry?
-
connected the 800/600 display VGG804807-6UFLWB to the board NetDCUA5, installed image XIPVYB_CE6Core_V2.9_181009 saw this picture. How can I fix it?;(
[IMG:http://pixs.ru/image/OA3sA]
[IMG:http://pixs.ru/image/OVI25]
The screen is checked on another board. all right. works
-
thanks for the answer. Windows is installed. The problem was with the network.
-
Good afternoon!
Use NetDCUA5. Rev 1.10.
connected to the board using DcuTermi
Set EBoot
how to install wince6 using ESHELL?
how to assign a mac address?
please help with advice, or give a link, or a document to read.
