Hello F&S Elektronik Systeme GmbH,
We have completed additional investigation of the MDT0500B1IH-MIPI display on our i.MX8ULP platform and would appreciate your feedback.
Hardware/Software
- F&S OSM-SF-MX8ULP
- Linux 6.6.129
- NWL MIPI-DSI host
- MDT0500B1IH-MIPI
- ILI9881C
- 4-lane RGB888
BIST Verification
We enabled the ILI9881C internal BIST mode as described in the datasheet.
Result:
- Vertical colour-bar pattern displayed correctly across the complete panel
- No distortion observed
Readback during BIST:
power-mode=10 2 diagnostic=01 3
This appears to confirm:
Panel hardware functional ILI9881C functional LCD glass functional Internal source/gate driving functional
Normal Operation
After disabling BIST:
power-mode=9c 2 diagnostic=c0
We can successfully observe:
Black framebuffer → black display White framebuffer → white display Random framebuffer → random image content
Therefore the DRM pipeline and DSI link appear active.
Driver Configuration
Confirmed:
dsi->format = MIPI_DSI_FMT_RGB888; 2 dsi->lanes = 4; 3
Mode Flag Testing
Tested:
VIDEO | VIDEO_BURST 2
Result:
Best image obtained so far Partial logos visible Partial text visible Image duplicated/repeated
NWL-DSI reports:
flags=0x3
Tested:
VIDEO | VIDEO_BURST | LPM 2
Result:
No visible change
NWL-DSI reports:
flags=0x803
Tested:
VIDEO | VIDEO_SYNC_PULSE
Result:
Only coloured noise No recognizable graphics
NWL-DSI reports:
flags=0x5
Timing Testing
Pixel clock:
76400 -> partial recognizable image 2 70000 -> same result 3 62000 -> no display 4 `
Horizontal porch changes also did not significantly alter the symptom.
Current Observation
The panel is clearly receiving video data, however graphical content appears duplicated and corrupted.
Since:
- BIST is successful
- RGB888 is confirmed
- 4-lane operation is confirmed
- Multiple timing and mode-flag experiments have been performed
we would appreciate any guidance regarding known NWL-DSI/i.MX8ULP specific requirements or any host-side configuration that may affect packet formatting or video transmission for ILI9881C-based panels.
Kind regards,
Srinadh T