NetDCU8 display settings for EDT ETM0430005ADH6

    Hello,


    can anyone provide me please with the correct (means working) display settings for the 4.3 inch TFT ETM0430005ADH6 from EDT? I have some strange issues like pixel missalignment, color deviation, unreadable icon text, and so on.


    Thanks a lot.


    Daniel

    Please try;
    reg open \drivers\display\Samsung
    reg create key mode100
    reg set value name string "EDT ET043005"
    reg set value EFW dword 2
    reg set value BFW dword 2
    reg set value msignal dword 2
    reg set value rows dword 272
    reg set value LPP dword 272
    reg set value width dword 94
    reg set value height dword 54
    reg set value contrastenable dword 0
    reg set value contrastvalue dword 0
    reg set value type dword 6
    reg set value config dword 0x00300000
    reg set value columns dword 480
    reg set value PPL dword 480
    reg set value HSW dword 41
    reg set value bpp dword 24
    reg set value lcdclk dword 9
    reg set value VSW dword 10
    reg set value BLW dword 2
    reg set value ELW dword 2
    reg set value EnableCursor dword 0
    display mode set 100
    reg save
    Which setting did you use?
    Maybe try also "reg set value config dword 0x00700000". I did not check the data sheet:(

    F&S Elektronik Systeme GmbH
    As this is an international forum, please try to post in English.
    Da dies ein internationales Forum ist, bitten wir darum, Beiträge möglichst in Englisch zu verfassen.

    I tried the following settings which are working fine now.


    reg open \drivers\display\Samsung
    REM reg create key mode100
    reg open mode100
    reg set value BFW dword 2
    reg set value BLW dword 2
    reg set value bpp dword 16
    reg set value columns dword 480
    reg set value config dword 0x00700000
    reg set value contrastenable dword 0
    reg set value contrastvalue dword 0
    reg set value EFW dword 2
    reg set value ELW dword 2
    reg set value EnableCursor dword 1
    reg set value height dword 54
    reg set value HSW dword 41
    reg set value lcdclk dword 12000000
    reg set value LPP dword 272
    reg set value msignal dword 2
    reg set value name string "ETM043005ADH6"
    reg set value PPL dword 480
    reg set value rows dword 272
    reg set value type dword 6
    reg set value VSW dword 10
    reg set value width dword 95
    reg save
    reg open \drivers\display\Samsung
    display mode set 100
    reg save


    Thanks to FS-Support.


    Kind Regards.


    Daniel